#FEMbruary 2022 figure painting and conversions – Good Queen Bess and the Generic Empress

Two slow burner female figures that have been stalled on the Painting Table but finally finished for #FEMbruary 2022, that celebration of the believable female figure in our modelling and gaming collections.

#FEMbruary 2022 figure No. 1 this month featured an introduction to #FEMbruary and this skater girl,

#FEMbruary 2022 figure No. 2 – The Generic Empress or Queen

You can glimpse the Empress / Queen in black undercoat on my painting table at the back of this picture and the Ladybird book inspiration for the costume colours.

https://manoftinblog.wordpress.com/2022/01/15/meanwhile-back-in-the-bunny-hospital/

On the New Year rule of “painting what I have in hand”, I used this joblot-acquired or gifted figure of an Empress figure that could be “Queen Elizabeth The First” but is more likely to be Catherine the Great in 54-60mm brown plastic.

With this impressive Sceptre, she could also be a Queen or Empress of Syldavia in King Ottakar’s Sceptre in the Tintin books, bearing the pelican sceptre.

I could of course spend real money on a painted Queen Elizabeth Figure from Tradition Of London / RP models: https://toy-soldiers.store/product_info.php?products_id=816

Shiny gloss toy soldier painting style, pink cheek dot and all.

FEMbruary 2022 figure No. 3 – The Amazonian Armada Elizabeth the First

This archer is from a 54mm generic fantasy figure set by True Legends Toys (USA?), what is probably meant to be an androgynous Legolas type elf man? The others can be seen here:

https://poundstoreplasticwarriors.wordpress.com/2019/02/24/fantasy-plastic-warriors/

With impressive enough ‘man boob’ armour, I though it might convert easily enough into a Cate Blanchett type Galadriel or Queen Elizabeth at Tilbury type figure.

Literally a Copper Top, as I used my favourite bright gloss acrylics for the shiny toy soldier look from Revell Aquacolor of Orange and copper highlights!

A tissue paper and PVA skirt was added as no self-respecting queen would show off her legs in such martial manly attire!

The visual inspiration was Cate Blanchett’s Tilbury speech from her Elizabeth The Golden Age film. Trailer / clip on YouTube here.

I was also imagining her with a bow, rather than sword, as it also has the classical Amazon overtones or huntress iconography of Diana and Artemis.

Anyway its all just more classical and Tudorbethan Imagi-National propaganda for my Arma-Dad’s Army project! I love this Holy Grail / Monty Python-esque type muster of troops on the clifftops, again useful for Armada era uniform details.

Some screenshots from the Trailer / clip for uniform and colour reference.

My final #FEMbruary female figure (No. 4) will be out of this world … watch this space! (Two clues there).

Blog posted by Mark Man of TIN, 23/24 #FEMbruary 2022

The Spanish Fury!

54mm Spanish Armada troops that I have enjoyed painting in shiny toy soldier style – Chintoys Conquistador Set 1 plastic figures.

Crossposted on 30 October 2020 from my Man of TIN main blog for you to enjoy!

https://manoftinblog.wordpress.com/2020/10/30/the-spanish-fury/

From Black Prince Knight to Elizabethan “Arma-Dad’s Army” Muster or Militia 54mm plastic conversion

Before, during and after conversion from Plastic knight to Elizabethan rabble

After reading my last post, Alan Gruber of the Duchy of Tradgardland asked for a “how it was done” blog post on how to downgrade a cheap plastic 54mm knight or man at arms into a Spanish Armada era Elizabethan armed rabble known as the ‘Muster’. This was a Tudor version of the Militia or WW2 Home Guard.

Here’s some I made earlier: four Elizabethan rabble converted from this original figure type.

So I took some photos of this downgrade or upgrade when next converting one of these cheap plastic knights or men at arms with its medieval Black Prince type helmet, coronet and heraldic tabard.

Step 1: Off with the helmet point and coronet

Step Two – use scalpel and file to remove detail

Use the file point to tough over any medieval detail such as the plate armour, chain mail around the neck, posh knife belt and heraldic devices on the tabard.

The file point is also useful for roughing up what was chain mail and the neck section of the helmet into long hair.

Step Three – Masking tape trousers or breeches

The strips of masking tape rough measured by eye and cut to size below the knee. Several layers of masking tape needed to bulk out these breeches or trousers. This is not Tudor fashion, the effect you want to achieve is rough working clothes.

Any further plate armour and chainmail detail can be lightly removed by scalpel.

Step Four – More Masking tape

Add masking tape strips to thicken out arms where you have removed armour plate. Cut V shape strips to make a tailored breast plate, secured with a thin dot of super glue. The masking tape roughed up with the file point …

Step Five – Undercoat to blend all together

Step Six – Paint in shiny toy soldier acrylics

Although shiny toy soldier style paint is used including the pink cheek dots, the look of the clothes should be far from parade ground and not ‘uniform’ with the other already completed figures.

On the painting stand …

The finished article next to the original figure

Shiny silver paint is used for toy soldier style simplicity. In reality, the scrapyard of armour and helmets that the Elizabethan Muster wore especially in more remote rural and coastal areas were probably already old fashioned and burnished up from their slightly rusty state. The Trained Bands were probably mostly better equipped than the Muster.

Hidden underneath his left hand is a partly concealed dagger in a scabbard, only a small part of the hilt of this knife is visible, hence the reason for the leather belt.

You could if wanted vary the spear to a pole arm or other agricultural looking tool. Whatever pointy stick you choose, “Remember – they don’t like it up ’em!”

I may do another one of these standing figure poses as an archer and one as visiting journalist, playwright, ballad writer and travelling player young Bill Shaxbeard. Somebody has to write up these epic struggles in doggerel, verse and prose!

Step Seven – Gloss spray varnish and base as required.

As regards paints, unless otherwise stated, I use Revell Acrylic Aquacolor, mostly the limited colours of their gloss range but also some of their matt acrylics as well. The light spray of gloss varnish should blend these together.

Spray varnished – shiny on parade, if not smart

Some of the brighter colours like the 361-52 Blue gloss looked a little too bright and too much like another of the figures with his blue coat or cassock. Some gloss black was mixed in.

These are not uniforms nor posh Tudor court clothes from portraits, they are everyday working clothes.

The 361-31 Fiery Red gloss of the woollen or cloth hat was also slightly darkened down with some Blue and Black, partly as I am using blue as the overall English bluecoat colour and red for the Spaniards.

The skin tone for my Spaniards and English troops is not the Matt Flesh 361-35 but the 361-35 AfrikaBraun matt. It gives a more old fashioned toy soldier look or tone to the skin. I used Humbrol enamel gloss Pink 200 for the cheek dot.

The leather shoe, hair and spear colour brown is the darker 361-84 Leather Brown Matt and lighter brown leather belt 361-80 Mud Brown gloss.

The green base is Pebeo Studio Acrylic tube 60 Opaque Chrome Green Hue.

So here is another finished member of my Tudorbethan coastwatch, the Beacon Boys, my late Elizabethan Amar-Dad’s Army, ready to ‘Muster’ against any Spanish invasion.

Blog posted by Mark Man of TIN, 15 October 2020

B.P.S. Blog Post Script

The Knights packaging to my set – with pictures of the horses and cavalry available in other sets

This type of cheap plastic knight can be found online worldwide as part of a bag of black and silver six poses knight set from many dealers such as https://www.ebay.co.uk/itm/60PCS-Black-Silver-Medieval-Knights-Warriors-Kids-Toy-Soldiers-Figure-Models-Set-/124188406402